Home Page Product listing by category Reference materials, engineering tables, downloads, archives, terms and conditions Product Applications Introduction to application-specific modules A collection of technical tips about our products, troubleshooting and general RDL knowledge Contact Radio Design Labs Employment opportunities Dealer Login Radio Design Labs Banner banner.php




Stay Connected RDL on Facebook RDL on Twitter RDL on YouTube RDL RSS Feed


PRODUCT CATEGORIES > AUDIO > MICROPHONE PRODUCTS >
EZ Products Banner

FP-MPA2 Dual Microphone Phantom Adapter 12, 24, 48 V - XLR

FP-MPA2 Dual Microphone Phantom Adapter 12, 24, 48 V - XLR

Radio Design Labs - Dual Microphone Phantom Adapter 12, 24, 48 V - XLR



  • Phantom Adapter for Two Mics
  • Selectable Phantom Voltage
  • 12V, 24V, 48V Phantom
  • Selectable Current for 24V Mics
  • All Standard Buildout Resistances
  • Ultra‑Compact All Metal Construction
  • Convenience of RDL® FLAT‑PAKs™

The FP‑MPA2 is the ideal choice in any applications where phantom power needs to be provided to powered microphones.

Two identical circuits are provided, with connections through XLR jacks. The microphone is connected to the module through the female XLR jack. The selected phantom voltage is applied to this jack. The microphone signal output is available on a male XLR. Phantom is blocked from this output jack. The phantom voltage is individually selectable for each input. A three position switch is provided for choosing 12 Vdc, 24 Vdc or 48 Vdc. Some microphones operating on 24 Vdc phantom perform optimally with higher value buildout resistances. For these particular 24 Vdc powered microphones, a second switch is provided to select the optimum current. The appropriate voltages are generated through a low‑noise dc‑dc converter and regulator circuits. Each phantom output is short‑circuit protected.

The FP‑MPA2’s low profile and compact size permit mounting in confined spaces and in various locations in equipment racks. The location of the input/output jacks permits high‑density mounting against flat surfaces while maintaining accessibility to the connectors. Installations requiring multiple FP‑MPA2s are ideally designed using FP‑MPA2s affixed to rack sides, or by mounting them to either the front or rear rack rails using the RDL FP‑RRA.

Typical Performance:

Inputs (2):

Low‑impedance balanced mic

Outputs (2):

Mic signal loop‑through

Voltage and Buildout Standard:

IEC 1938: 1996‑12

Phantom Voltages:

12 Vdc, 24 Vdc, 48 Vdc (selectable)

Selectable Buildouts (24V only):

1.2 kΩ NORMAL (standard) or 2.4 kΩ LO (low current)

Connector Type:

XLR

Power Requirement:

GROUND‑REFERENCED, 24 Vdc @ 120 mA

Dimensions:

Height:

1.42 in. 3.61 cm.

Width:

3.25 in. 8.26 cm.

Length:

6.67 in.

Ambient Operating Environment:

0° C to 50° C


Phantom Adapter for Two Mics, Selectable Phantom Voltage, 12V, 24V, 48V Phantom, Selectable Current for 24V Mics, All Standard Buildout Resistances, Ultra-Compact All Metal Construction, Convenience of RDL® FLAT-PAKs , The FP-MPA2 ideal choice in any applications where phantom power needs to provided to powered microphones, Two identical circuits provided, connections through XLR jacks microphone connected to module through female XLR jack selected phantom voltage applied to this jack microphone signal output available male XLR Phantom blocked from this output jack phantom voltage individually selectable input three position switch provided choosing 12 Vdc, 24 Vdc 48 Vdc Some microphones operating 24 Vdc phantom perform optimally higher value buildout resistances these particular 24 Vdc powered microphones, second switch provided to select optimum current appropriate voltages generated through low-noise dc-dc converter regulator circuits phantom output short-circuit protected, The FP-MPA2’s low profile compact size permit mounting in confined spaces in various locations in equipment racks location of input/output jacks permits high-density mounting against flat surfaces while maintaining accessibility to connectors Installations requiring multiple FP-MPA2s ideally designed using FP-MPA2s affixed to rack sides, mounting them to either front rear rack rails using RDL FP-RRA, format converter Data/Installation

Mounting Accessories:

Rack Adapter FLAT-PAK Series - 19" FixedFP-RRA
Rack Adapter FLAT-PAK Series - 19" Fixed

Rack Adapter FLAT-PAK Series - 19" HingedFP-RRAH
Rack Adapter FLAT-PAK Series - 19" Hinged

FLAT-PAK DIN Rail AdapterDRA-35F
FLAT-PAK DIN Rail Adapter

Pole Mount TrayPM-1T
Pole Mount Tray

Pole Mount Adapter for FLAT-PAK Modules - VerticalPM-1V
Pole Mount Adapter for FLAT-PAK Modules - Vertical

Related Products:

ST-MPA2
Microphone Phantom Adapter - 2 Channel

STM-1
Microphone Preamplifier - 50 dB Gain

EZ-MPA1
Microphone Preamplifier - Stereo Output with Compressors

EZ-MPA2
Dual Microphone Preamplifier - Stereo Output with Compressors

Home
Products
Reference
Applications
Introduction
Tech Tips
Contact us
Employment
Login
Sitemap

Copyright © 2010 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: June 29 2010

...